Autonomous Colleges In Maharashtra

Name of Faculty

Title of the Paper

Journal/Conference with date

Dr. V.R. Naik

Development in Performance

of Impeller used in

Centrifugal Pump by using

CFD

International Journal of

Innovation in Engg and

Technology (IJIET)

Dr. V.R. Naik

Characterization of developed Al 6061-SiC metal matrix composite produced by stir

casting method.

Journal of Innovative

research in science and

Engineering, ISSN: 2454-

9665

Dr. V.R. Naik

Develop. of Al 6061-SiC

composite & its use in mfg. of dovetail by single response optima.of hardness & surface

roughness by Taguchi

method in stir casting

Journal of Innovative

research in science and

Engineering, ISSN: 2449-

6010

G.C. Mekalke,

B.B. Kabnure

Design and Dev. of test setup to study the basic procedure of vibration analysis

International Journal of

Computer Engineering In

Research Trends ISSN

(O): 2349-7084

V.B. Magdum

“Investigate the effect of

approaching angle on cutting force during EN 8 steel

turning”

International Journal of

Computer Engineering in

Research Trends, ISSN:

2349-2784,

G.C. Mekalke, R.R.

Kolhapure,

“Analytical and Parametric

Optimization of Force

Transmissibility by Taguchi

Method for Double Stage

Engine Mountings”,

International Journal of

Computer Engineering In

Research Trends, ISSN

(O): 2349-7084,.

M.R. Rawal,

R.R. Kolhapure,

S.S. Sutar and

V.D. Shinde,

“Optimization of Resistance

Spot Welding of 304 Steel

Using GRA”,

International Journal of

Computer Engineering In

Research Trends, , ISSN

(O): 2349-7084.

Prof.R.D.Patil ,

Prof.P.N.Gore ,

Prof.PA.Naik ,

Prof.U.S.Bongarde.

"Optimization of Hollow

Specimen Dimensions in

Torsion Testing of AISI 1020 Steel using Grey Relational

Analysis",

International Journal for

Scientific Research &

Developmen, ISSN (O):

2321-0613.

D.M.Kalai

V.A.Kamble

A.M.Rathod

B.K.Khot

Parametric Optimization of

Rectangular Beam Type Load Cell Using Taguchi Method

International Journal of

Computer Engineering In

Research Trends(IJCERT)

D.M. Kalai

Synthesis of Planer Eight Bar Mechanism for Function and Path Generation

Global Research and

Development Journal

for Engineering (GRDJE)

RakeshKolhapure, VasudevShinde,

Vijay Kamble

Geometrical optimization of strain gauge force transducer using GRA method

Science Direct, Measurement, Volume 101, 2017 ISSN 0263-2241 pp. 111-117.

P.S.Badkar, D.M.Kalai

Design, Manufacturing and Analysis of Alloy Steel Brake Disc

Asian Review of Mechanical Engineering Vol. 6 No. 1, 2017

ISSN: 2249 - 6289, , pp.31-37

D.M. Kalai

P.A.Naik

Mechanical Design of Extended Chassis Frame for Defence Vehicle

Asian Review of Mechanical Engineering Vol. 5 No. 2,

ISSN: 2231-6108 2016, pp. 1- 10

V.B.Magdum

Dr.V.R.Naik

“Investigating Feed Rate Effect on Cutting Force of EN 8 Turning”,

Asian Review of Mechanical Engineering, Vol. 6 No. 1, 2017, ISSN: 2249 –6289 , PP.8-12.

V.B.Magdum

Dr.V.R.Naik

“Study of effect of tool geometry on cutting force generated during

turning”, in

 

International Journal for Scientific Research and Development

(IJSRD), Vol. 4, Issue 12, February 2017, ISSN (Online): 2321 0613, PP 892-895.

Prof.Rajkumar D. Patiland ,Prof.PurushottamN.Gore

Analysis of Specimen Dimensions in Torsion Testing of AISI 1020 Steel using Single Objective Taguchi Method and Multi Objective Grey Relational Analysis”,

Asian Review of Mechanical Engineering Vol. 6 No. 1, 2017 ISSN: 2249 - 6289, pp.3-7.

Prof. Rajkumar.D.Patil, Dothre Dinesh, Hegade Sachin, Urane Vivekand, Killedar Vishal

“Design of Milling Fixture in Mass Production of Pivot Block”,

Asian Review of Mechanical Engineering, Vol. 6 No. 1, 2017ISSN: 2249 - 6289, pp.13-17.

Prof. Bahubali B. Kabnure and Prof. Rajkumar.D.Patil,

“Effect of Inclination on Efficiency of Heat Pipe”

,Asian Review of Mechanical Engineering, Vol. 6 No. 1, 2017 ISSN: 2249 – 6289, , pp.38-42.

Suraj Yadav, Sanket Benade, Sushil Angchekar,

Vaibhav Dhokle, Prof. Rakesh Kolhapure

DESIGN AND ANALYSIS OF KNUCKLE JOINT BY USING FEA"

International journal of current engineering and scientific research (ijcesr), vol.4, issue 6, Issn no.

2393-8374, pp.70-77

S. A. Soundattikar, SnehaGadkari, Amit Patil, SushilKhade

Case Study on Process Automation using PLC in soft drink manufacturing

International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE) Vol 2, Issue 2, February 2017 ,ISSN (Online) 2456-1290 pp 93-97

S. A. Soundattikar, Deepak Salunkhe

Design and development of automated capsicum sorting system using PLC

Journal of Advances in Science and Technology , Vol.XIII, Issue – 1, March 2017 ISSN: 2230-9659 pp19-22

S. A. Soundattikar, Shubham Mane, Pranav Anuje

Case study on PLC operated Automatic Handling Systems in Mechanical Industry

International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE) Vol 2, Issue 2, February 2017 ,ISSN (Online) 2456-1290

Pp 89-92

S. A. Soundattikar, Harsh Vernekar, NamrataMone, Rohan Patil

Case study on Micro Drill Hole Inspection using PLC

International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE), Vol 2, Issue 2, February 2017 ISSN (Online) 2456-1290 pp46-49

Dr.V.R.Naik

Review on Manufacturing and analysis of composite lever clutch for Two wheeler

International journal for innovative Research in Science and Technology (IJIRST ) Vol.3

Issue 10 , march 2017

ISSN 2349-6010 pp 289-293

Dr.V.R.Naik

Use of composite material for replacement to Aluminum

In conventional two wheeler

Lever clutch.

International journal for innovative Research in Science and Technology (IJIRST ) Vol.3

Issue 10 , march 2017

ISSN 2349-6010 pp 293-296

Dr.V.R.Naik

Development of performance of impeller used in centrifugal pump by using computational fluid Dynamics (CFD)

International Journal of innovations in Engineering and Technology (IJIET) vol.7

Issue 3 , oct 2016 ISSN 2314-1058

pp 114-120

Dr.V.R.Naik

Comparative Numerical Static

Analysis of centrifugal pump impeller design for water holding applications of medium Capacity

International journal for specific research and Development vol.4 Issue 07,2016

ISSN-2321-0613 pp 1029-1032

Dr.V.R.Naik

Analysis and optimization of speed feed and no of teeth of circular saw for special purpose sawing machine

International journal for innovative Research in Science , Engineering and Technology (IJIRSET ) Vol.5

Issue 9 , ISSN 2347-6710

pp 16099-16108

Dr.V.R.Naik

Design & Development of Special Purpose Machine for its Cycle Time Optimization

Imperial Journal of Interdisciplinary Research (IJIR)

Vol-2, Issue-9, 2016

ISSN: 2454-1362, pp 1654-1663

Dr.V.R.Naik

Design & Development of Auto gauging Machine for outer ring of Needle Bearing

International Journal of Interdisciplinary (IJIR)

Research vol.2, Issue 9 , ISSN 2454:1362

pp 1667-1675

Dr.V.R.Naik

Development Of Automation Based Electronic gauging system using Mechatronic devices

International journal of innovative Research in Science engineering & technology (IJIRSET) Vol.1 Issue 9 , Issn2319-8753 pp 16073-16087

Kishor K. Powar

Automatic Bar Feeding By Linear Indexing on Cutting Machine

IJSRD - International Journal for Scientific Research & Development| Vol. 5, Issue 02, 2017 | ISSN (online): 2321-0613

Dr. Shinde V.D.

Akiwate S. B.

Development of Honeycomb Sandwich Structure for Aeronautical Flooring Components

1st National conference on Mechanical Engineering in Next decade, Karad,2017, pp 165-170

Dr. Shinde V.D.

Akiwate S. B

Experimental Investigation of Bending behavior of Aluminium Alloy Honeycomb SandwichStructure using Four Point Bending Tests

International Journal for Innovative Research in Science & Technology, 4 (1), , ISSN (online): 2349-6010 pp 97-101

Dr. Shinde V.D.

S. A. Patil

“Design, Development and Analysis of Impeller for Sand Slurry Pumping”

International Journal of Innovative Research in Science & Technology, 4(2),ISSN (online)2349-6010 pp 112-117.

Dr. Shinde V.D.

S. A. Patil

Testing of Two Different Enclosed Impellers at Same Speed”

International Journal of Innovative Research in Science, Engineering and Technology. Vol.6 (7), ISSn 2347-6710 13244-13248

Dr. Shinde V.D.

M.S.Akiwate

Comparative analysis of photoelastic technique using ansys”

2ndNational Conference on Recent Trends in Mechanical Engineering (NCRTME - 2017),WCE, Sangli.

P.S. Barge,

Dr. V.D.Shinde,

Vibration analysis of bearings in centrifugal pump

2ndNational Conference on Recent Trends in Mechanical Engineering (NCRTME - 2017),WCE, Sangli.

2016-17

 

 

2017-18

Name of Faculty

Title of the Paper

Journal/Conference with date

Dr.V.R.Naik

Validation in the improvement of

performance centrifugal pumps

Using CFD

 

International research journal of

Engineering & Technology

ISSN: 2395-0072, Vol.4, issue 6 June 2017

Dr.V.R.Naik

Investigating feed rate effect on cutting force of EN8 turning

 

Asian Review of Mechanical

Engineering , ISSN: 2249-5289 Vol 6 , No.1 , 2017, p.p 8-12

Dr.V.D.Shinde

“Development of Honeycomb

Sandwich Structure

for Aeronautical Flooring

Components”,

 

1 st National conference on

Mechanical

Engineering in Next decade,

Karad, 165-170.

Dr.V.D.Shinde

“Experimental Investigation of Bending behavior of

Aluminium Alloy Honeycomb Sandwich Structure using Four

Point Bending Tests”

 

International Journal for

Innovative Research in Science

& Technology, 4 (1),97-101,

ISSN (online): 2349-6010

Dr.V.D.Shinde

“Design, Development and

Analysis of Impeller for Sand

Slurry Pumping”

 

International Journal of

Innovative Research in Science

& Technology, 4(2), 112-117.

Dr.V.D.Shinde

“Testing of Two Different Enclosed

Impellers at Same Speed”

 

International Journal of

Innovative Research in Science,

Engineering and Technology.

Vol.6 (7), 13244-

13248.DOI:10.15680/IJIRSET.2

017.0607063

Dr.V.D.Shinde

“Comparative analysis of

photoelastic technique using

ansys”

 

2ndNational Conference on

Recent Trends in Mechanical

Engineering (NCRTME -

2017),WCE, Sangli

 

Dr.V.D.Shinde

“Vibration analysis of bearings in

centrifugal pump”

2ndNational Conference on

Recent Trends in Mechanical

Engineering (NCRTME -

2017),WCE, Sangli.

V .P.Gaikwad

 

Fabrication and testing of silicon

based micro channel heat exchanger

Inspired by leaf venation pattern for

electronic cooling

International journal for precision

technology.(accepted paper )

P.S.Badkar

D.M.Kalai

 

Design, Manufacturing and

Analysis of Alloy Steel Brake Disc

Asian Review of Mechanical

Engineering

ISSN: 2249 - 6289 Vol. 6 No. 1,

2017, pp.31-37

Rajkumar D. Patil

Uttam S.

Bongarde

Vishal R. Balwan

 

Effect of Specimen Dimensions on

Yield Shear Stress in Torsion

Testing

of AISI 1020 Steel by using

Taguchi with GRA

IJSRD - International Journal

for Scientific Research &

Development| Vol. 5, Issue 09,

2017 | ISSN (online): 2321-0613

Rakesh

Kolhapure,

 

“Analysis of Four Wheel Steer

Electronic Vehicle Using FEA

Method,”

International Journal of

Innovative Science and Research

Technology, ISSN NO. 2456 –

2165, 2, 10, 104-111,Oct-2017.

D.M. Kalai

P.A.Naik

 

Mechanical Design of Extended

Chassis Frame for Defense Vehicle

Asian Review of Mechanical

Engineering

ISSN: 2231-6108 Vol. 5 No. 2,

2016, pp. 1- 10

Dr. V.R. Naik

 

Validation in the improvement of

performance centrifugal pumps

Using CFD

Int. Research Journal Of

Engineering & Technology

Dr. V.R. Naik

 

Investigating feed rate effect on

cutting force of EN8 turning

Asian Review of Mechanical

Engineering

Dr. V.R. Naik

 

Experimental validation of vibration

characteristics of selected centrifugal

pump

Int. Research Journal Of

Engineering & Technology

Prof.V. A. Kamble,

Prof.A. R. Balwan

 

Optimizing Turning Parameters of

Al/Sicp Metal Matrix Composite Using

Response Surface Methodology

Int. Journal Of Science,

Technology And Management

Dr. V. D. Shinde

 

Design, Development and Analysis of

Impeller for Sand Slurry Pumping

Int. Journal for Innovative

Research in Science &

Technology,

Dr. V. D. Shinde

 

Testing of Two Different Enclosed

Impellers at Same Speed

Int. Journal of Innovative

Research in Science

Engineering and Technology,

Dr. V.D.Shinde

 

Experimental Investigation of bending

behavior of Aluminium Alloy

Honeycomb Sandwich Structure using

Four Point Bending Tests

Int. Journal for

Innovative Research in Science

& Technology

Prof. V.P.

Gaikwad

 

Fabrication and testing of silicon based

micro channel heat exchanger Inspired

by leaf venation pattern for electronic

cooling

Int. journal for precision

Technology

Prof. P.S.Badkar

Prof. D.M.Kalai

 

Design, Manufacturing & Analysis of

Alloy Steel Brake Disc

Asian Review of Mechanical

Engineering

Rajkumar D. Patil

UttamS.Bongarde

Vishal R. Balwan

 

Effect of Specimen Dimensions on

Yield Shear Stress in Torsion Testing of

AISI 1020 Steel by using

Taguchi with GRA

Int. Journal for Scientific

Research & Development

 

 

   

Prof. R.R.

Kolhapure

 

Analysis of Four Wheel Steer Electronic

Vehicle Using FEA Method

Int. Journal of

Innovative Science & Research

Technology

Prof. D.M. Kalai

Prof. P.A. Naik

 

Mechanical Design of Extended

Chassis Frame for Defense Vehicle

Asian Review of Mechanical

Engineering

 

 

2016-17

Name of  Faculty

Title of the Book

Publisher

Prof. G. C. Mekalke  

Crash Analysis of Front Bumper of SUV Using Finite Element Analysis

Lambert Academic Publishing, Germany

ISBN No: 978-3-330-07262-6

Prof. B. B. Kabnure and Prof. (Dr.) V.D. Shinde

Modeling, Simulation and Process Development of Impeller Casting

Published @ Lambert Academic Publishing, Germany

ISBN No: 978-3-330-03020-6

 

 

Mechanical Department Details of the Patents Filed

Sr.No.

Title

Patent Number

Name of the Faculty

1

Smart Honking and Turn System Using Wireless Control Glove

201621030787

Dr. V.R. Naik

Prof. U.S. Khade

2

Component tying machine and flower garland making machine.

 

Dr. V.R. Naik

Prof. U.S. Khade

 

2016-17

Name of  Faculty

Workshop/Lecture Topic

Date

Place

Mr. Shrikant Bidwai

“Introduction to Finite

Element Based Simulation”

12-08- 2016

DKTES TEI

Mr. Ramchandra Rao

‘Career Opportunities in Power Plant Engineering’

07-11-2016

DKTES TEI

Mr. Vaibhav Srivastava,

Guided students for IES and

GATE exams

26-07-2016

DKTES TEI

Prof. N.V.Deshpande

‘Innovations in Biomedical Engineering’

18-01-2017

DKTES TEI

2017-18

Name of  Faculty

Workshop/Lecture Topic

Date

Place

Mr. Vignesh Naidu

“Job Profiles Based on Abacus Software in Industry”

25-09-2017

DKTES TEI

1] Mayur Kalani

2] Pallavi Khot

3] Anagha Bedis

3D-Printing

28-09-2017

DKTES TEI

Mr.Nikhil Padate

“Entrepreneurship Development”

26-09-2017

DKTES TEI

Mr.Shrikant Bidwai

Hyper loop Technology,

07-02-2018

DKTES TEI


 

2016-17:

Name

Name of Events

Name of College/Place

Prize

Sanket Munot (Captain), Akshay Khade (Vice-Captain),

Abhijeet Kudache (Driver), Abhijeet Hawal Onkar Magtdum Alok, Doshi Rushikesh Khade,

Adarsh Bhatgunki, Virendra Kitturkar, Pankaj Khot, Koustubh Potdar, Digvijay Patil,

Shubham Chikhalkar, Bhagyashri Patil, Minal Shinde, Tanmay Hatti, Umesh Desai,

Prasad Mali, Arvind Patil, Omprakash Ipper

National Kart Racing Championship

National Kart Racing Championship

2nd prize

for the Endurance test and achieved 2nd rank in final race

a) AshiwiniZujar b)SheetalShingare

Tech-Symposium 2K1

Poster Presentation

DKTE Ichalkaranji

Winner

a) Sagar Patil

b) GeetPandit

Tech-Symposium 2K1

Jig Design

DKTE Ichalkaranji

Winner

 

2017-18

Name of the Student

Name of Events

Name of College

Prize

Mr.Shubham Banne, Mr.Sarang LokhandeMr.Swapnil Sangar

Silver Jubilee of Department of Mechanical Engineering, a

Mechanical Monument Designing Competition was organized in the

Department

DKTE Ichalkaranji

1st winner

Miss Shruti Pardeshi, Miss Aishwarya Mahajan

Miss Revati Todkar

Silver Jubilee of Department of Mechanical Engineering, a

Mechanical Monument Designing Competition was organized in the

Department

DKTE Ichalkaranji

2nd winner

Mr.Shubham Patil,

Mr.Nishant Sangave, Mr.Tirthraj Patil

Mr.Sushant Patil

Silver Jubilee of Department of Mechanical Engineering, a

Mechanical Monument Designing Competition was organized in the

Department

DKTE Ichalkaranji

3rd winner

Jeevan Bedage,

Shubham Hagare Shubham Gurav

Abhi Kadam

Suyog Dongare

“Team - O - Mania”.

DKTE Ichalkaranji

Winner

Shantanu Yalrute PrathameshUrunkar

Amit Sontakke

Amey Potdar

Rajwardhan Wangikar

“Team - O - Mania”.

DKTE Ichalkaranji

1st Runner up

Asutosh Chhachwale Arshad Pimpare

Arbaz Shaikh,

Omkar Karveer

Anand Karade 

“Team - O - Mania”.

DKTE Ichalkaranji

2nd Runner up

Netraj Surnis

TECH-QUIZ

DKTE Ichalkaranji

Winner

Swapnil Mali

TECH-QUIZ

DKTE Ichalkaranji

1st Runner up

Sohel Mujawar

TECH-QUIZ

DKTE Ichalkaranji

2nd Runner up

Sonali Jadhav

“Techsymposium 2k18” Energy Carnival

DKTE Ichalkaranji

Winner

Pranavi Bhosale

Swati Ghune

“Techsymposium 2k18” Energy Carnival

DKTE Ichalkaranji

Runner up

Amit Sasane and Tirthraj Patil

“Techsymposium 2k18” CadBee

DKTE Ichalkaranji

Runner up