Following are the equipment in this laboratory used for various purposes
Pneumatic Servo System to simulate and study all types of Hydraulic and Pneumatic valves for flow control, direction control and pressure control.
Following are the equipment in this laboratory used for various purposes
Following are the equipment in this laboratory used for various purposes
Refrigeration and Air Conditioning (RAC) lab is an educational and research facility for hands-on learning and experimentation with cooling and environmental control systems, offering practical experience with refrigeration cycles, psychrometric processes, and performance evaluation of equipment like vapor compression systems, heat pumps, and air conditioners. This lab is equipped with various test rigs and instruments to demonstrate principles, analyze system performance, and support student projects for academic programs in engineering.
Purpose and Objectives
Hands-on Learning:
Provides practical experience with the working principles of refrigeration and air conditioning systems. Thermodynamic Analysis:
Facilitates the study of refrigeration cycles and psychrometric processes (properties of moist air).
Performance Evaluation:
Allows for the evaluation of the performance of different systems and components.
Research and Projects:
Supports undergraduate and postgraduate research projects, as well as career development in HVAC (Heating, Ventilation, and Air Conditioning).
Key Equipment and Facilities
Refrigeration Test Rigs:
Units for studying various cycles, including vapor compression, vapor absorption refrigeration.
Air Conditioning Trainer:
System for demonstrating air-conditioning processes, such as duct-type units.
Heat Pump:
Demonstration of heat pump
Specialized Equipment:
Ice plant test rig, domestic refrigerator setup
Instrumentation:
Instruments for measuring temperature, pressure, humidity, and air velocity, often used with psychrometric charts.
Following are the equipment in this laboratory used for various purposes
Following are the equipment in this laboratory used for various purposes
{slider= Material Testing laboratory}
CAD/CAM caters to the requirements of development of basic conceptual design for an engineering component then carrying out stress/strain analysis of the conceptual model built by using sophisticated design software like
Following are the equipment in this laboratory used for various purposes
This workshop caters to the requirement for all the students from textile, electronics and mechanical department. Workshop is equipped with following machinery required to carry out basic mechanical engineering operations like turning, welding, milling, drilling, shaping, etc.
Machines available in this workshop:
Following are the equipment in this laboratory used for various purposes
This lab is equipped with various testing rigs for various types of I.C engines
All the engine test rigs are having facility to check the performance under varying load conditions by rope brake dynamotor or hydraulic dynamometer. Duel fuel type generator set developing 2.5 Kilo Watt power with testing panel backs up the lab.
SMART Foundry 2020 project under TSDP of DST
Ten research institute including public and private engineering collages as well as govt. R&D organizations have come together to reinvent metal casting process for education and entrepreneurship by leveraging the latest techniques in 3D Scanning, CAD Simulation, 3D printing and tabletop metal casting technologies.
There is a need to accelerate manufacturing in developing countries like India, to provide employment for millions of young people and contribute to economic development, but this needs to be achieved with minimal adverse impact on the environment. Smart manufacturing allows wider distribution of related activities, creating employment opportunities closer to the end‐users based on their need, and reducing wastage of production resources as well as logistics. The enabling technologies, which are all broadly related to information technology, can be used to reinvent the manufacturing processes, especially metal casting, to make it more sustainable. The SMART Foundry system being developed by a collaborative team of researchers across India, is expected to get young people interested in manufacturing, who can set up small scale businesses, becoming job creators instead of job seekers.
The SMART Foundry 2020 team consists of 12 eminent scientists from 10 high ranking institutes. CSIR‐NIIST, Trivandrum; CSIR‐CMERI, Durgapur; VNIT, Nagpur; Jadavpur University, Kolkata; IIT Bombay, Mumbai; CHARUSAT, Anand; COE, Pune and Dr. Vasudev Shinde, DKTE TEI, Ichalkaranji. The total investment amount for the project is 83.694 lakhs.
MODERNIZATION OF INTERNAL COMBUSTION ENGINES LAB is sanctioned under the Modernization and Removal of Obsolescence (MODROB) scheme with Rs.1559608/- (Fifteen Lakh Fifty-nine Thousand Six Hundred Eight Only).
The undergraduate, postgraduate, and Doctoral research work in the field of fuels and engines need to develop the experimental set-ups which require not only time but a huge expenditure in the development of engine set-ups as per their requirement. It consists of a computerized engine set-up for both Diesel and Petrol fuels with variable compression ratios. This setup allows us to test the engine performance, particularly with the use of alternative fuels and blends as the substitute for Diesel and Petrol fuels. The results can be obtained quickly in a form ready to use in the research work.
AICTE-IDEA (Idea Development, Evaluation & Application) Lab scheme was launched by AICTE on January 1, 2021 to establish infrastructure supporting new-age learning, in its institutions. This is aimed at encouraging students to apply Science, Technology, Engineering, and Mathematics (STEM) fundamentals on ideas- towards enhanced hands-on experience, learning by doing, and even product visualization.
Major Equipment's in AICTE IDEA Lab
Major Equipment's
DEWESoft 7.0.4
The Mechanical Engineering Computer Laboratory is a state-of-the-art facility designed to support students and researchers in advanced computational and design tasks. The lab is well-equipped with modern infrastructure and software to enhance teaching, learning, and research activities.
Key Features:
Objectives of the Lab:
To provide hands-on training in modern design and analysis tools.
To support academic projects, industrial consultancy, and research activities.
To encourage innovation and creativity in product design and development.
To bridge the gap between theoretical knowledge and industrial applications.
This facility plays a vital role in enhancing the technical skills of students, preparing them to meet the challenges of modern mechanical engineering industries.
Mechanical Engineering Newsletter
| Jan 2025-Jun2025 | Click here to Download |
| July 2024-December 2024 | Click here to Download |
| Jan 2024-June 2024 | Click here to Download |
| July 2023-December 2023 | Click here to Download |
| Jan 2023-June 2023 | Click here to Download |
| July 2022-December 2022 | Click here to download |
| January 2022-June 2022 | Click here to download |
| July 2021-December 2021 | Click here to download |
| January 2021-June 2021 | Click here to Download |
| July 2020-December 2020 | Click here to Download |
| 24th January-June 2020 | Click here to download |
| 25th July - December 2019 | Click here to download |
| 26th January - June 2018 | Click here to download |
| 25th July - December 2017 | Click here to download |
| 24th January - June 2017 | Click here to download |
| 24th July - December 2016 | Click here to download |
MESA is Mechanical Engineering Students Association which is coordinated by students voluntarily. Every semester MESA organizes many activities related to student’s development and welfare. Activities conducted this semester were as follows,
MESA ACTIVITIES 2024-25
Seminar on Piping Design Engineering and Construction
Mechanical Engineering Students Association (MESA) organized a seminar on “Piping Design Engineering and Construction” on Tuesday 27th August 2024. The seminar was conducted by Mr. Ravi Jorigal, Manager-Business Development, Asian Academy, Pune. The seminar was organized for students of third and final year Mechanical Engineering students. Contents discussed in seminar were: Current situation in process industry, requirement of piping design engineers and placement situation in process industry. The seminar was coordinated by Prof. (Dr). B.B. Kabnure under the direction of Director Prof. (Dr.) L.S. Admuthe and HOD Prof. (Dr.) V.R. Naik.
TEACHERS DAY CELEBRATION
Every year 5th September is celebrated as Teachers' Day in the country. A day dedicated to teachers and their contributions to shaping one's life. On Monday, 09th September 2024 Mechanical Engineering Students Association (MESA) of the Mechanical Engineering department organized a Teachers Day Function to felicitate teachers. The function began with the worship of a photo of Dr. Sarvepalli Radhakrishnan. During the function, Prof. (Dr.)V. R. Naik Head of the department expressed his views about future opportunities, entrepreneurship, and challenges to be faced due to changing industrial needs. The faculties from the Mechanical department were present at this event. Students shared their love and affection towards teaching and non-teaching faculties from the department. The event was coordinated by Prof. (Dr). B.B. Kabnure under the guidance of Director Prof. (Dr.) L.S. Admuthe and HOD Prof. (Dr.) V.R. Naik.
Career Guidance for Students on the occasion of Engineers Day
Seminar on “Career Guidance for Students”
The Mechanical Engineering Department and MESA organized a seminar on Career Guidance for students. The session was led by HOD Mechanical Department. Prof. Dr.V.R. Naik, who provided valuable insights into future career opportunities in the field of mechanical engineering. Students were also guided by Social Dean Prof. S.G. Kanitkar, who emphasized the importance of consistent effort and encouraged students to adopt innovative ways of thinking. The seminar was both informative and motivating, giving students a clear direction for their professional journeys ahead. This event was organised on 20 September 2024 on the occasion of “Engineers Day” celebration. Faculty members and students of Mechanical Engineering Department were present on this occasion.
The event was organized by the Mechanical Engineering Students Association (MESA), led by President Vishwaraj Amar Patil, Vice-President Saniya Chougle, Secretary Tanmay Vayangankar, and with the support of Prof. Dr.Bahubali Kabnure as the Faculty Coordinator under the direction of HOD Prof. (Dr.) V.R. Naik and Director Prof. (Dr.) Mrs. L.S. Admuthe.
Guest lecture on Introduction to PLM and Career opportunities in PLM
Mechanical Engineering Department and Mechanical Engineering Student’s Association (MESA) organized an expert talk on “Introduction to PLM and Career opportunities in PLM” on 18th April 2025. Mr. Jayant Chavan, R & D Development Manager at Dassault Systems Ltd. Pune was the speaker for the event. He explained what is PLM? Components of PLM, PLM business process map and PLM tools. He also elaborated on benefits and importance of PLM. Major PLM software’s were discussed and career opportunities in PLM sector were deliberated. Students of second year and third year mechanical engineering class attended the expert lecture. The session was coordinated by Prof. (Dr.) V. P. Gaikwad under the direction of Prof. (Dr.) V. R. Naik, HOD (Mech) and Prof. (Dr.) L. S. Admuthe, Director, Textile and Engineering Institute.
MECHARTISTRY
Mechanical Engineering Students Association (MESA) organized a Technical event named “Mechartistry” on Friday 7th Feb 2025 for first year and second year students. The event featured in two rounds:
Round 1: Free Hand Sketching
Round 2: Presentation
The event aimed to enhance students drawing skill and refine their technical communication abilities, which are crucial for their academic and professional growth.
A total of 70 students from mechanical engineering department participated in the event. Prof. G.C.Mekalke and Prof. S.B.Rayjadhav served as judges for the event. The Event was organized by MESA Committee and Co-ordinated by Prof. B. B. Kabnure under the direction of Director Prof. (Dr.) L.S. Admuthe and HOD Prof. (Dr.) V.R. Naik.
The winners from first year mechanical:
1. harshvardhan Hargude, Sangram Gund- Winner
2. Vihaan Vaibhav Nargunde, Ruchita pandurang Ghodke -1st Runner Up
3. Adnan Dake, Veetrag Chougule- 2nd Runner Up
The winners from Second year mechanical:
1. Deepak Yadav, Chandrakant Koravi- Winner
2. Raj Powar, Harshavardhan Chougule- 1stRunner Up
3. Meet Kalal, Sharvil Lokhande- 2ndRunner Up
TECH SYMPOSIUM 2K25
TECH-SYMPOSIUM 2K25: Showcasing Engineering Brilliance!
DKTE successfully organized TECH-SYMPOSIUM 2K25 on 15 march 2025, bringing together talented engineering students from all over India!
The Mechanical Engineering Department hosted two thrilling competitions:
MAATICH KHEL – A challenge of technical expertise & creativity
CAD WAR 2K25 – A showdown of design skills & accuracy with 121 participants, the event was packed with energy and innovation!
Grateful to Prof. Dr. L. S. Admuthe (Director, DKTE), Prof. Dr. V. R. Naik (HOD, Mechanical Engg.), and Prof. Dr. A. D. Patil for their support!
Mechanical Engineering department students celebrated Teachers Day
Every year 5th September is celebrated as Teachers' Day in the country. A day dedicated to teachers and their contributions to shaping one's life. On Tuesday, 05th September 2023 Mechanical Engineering Students Association (MESA) of the Mechanical Engineering department organized a Teachers Day Function to felicitate teachers. The function began with the worship of a photo of Dr. Sarvepalli Radhakrishnan. During the function, Prof. (Dr.) V. R. Naik Head of the department expressed his views about future opportunities, entrepreneurship, and challenges to be faced due to changing industrial needs. The faculties from the Mechanical department were present at this event. Students shared their love and affection towards teaching and non-teaching faculties from the department. The event was coordinated by student advisor Prof. (Dr.) B. B. Kabnure.
Mechanical Engineering department students celebrated Engineers Day
DKTE Mechanical Engineering Students Association (MESA) celebrated Engineer’s Day on 15th September 2023, in honor of Bharat Ratna Sir Mokshagundam Visvesvarayya as a tribute to one of the greatest engineers of the country for his outstanding contribution to society. The function began with the worship of a photo of Sir Mokshagundam Visvesvaraya. The faculties and students from the Mechanical department were present at this event. The event was coordinated by student advisor Prof. (Dr.) B. B. Kabnure under the guidance of Prof. (Dr.) V.R. Naik.
The Mechanical Engineering Department, in association with the Mechanical Engineering Students Association (MESA), organized an expert session on “Entrepreneurship Development” on Friday 15th September 2023 on account of Engineers Day for the students of Mechanical Engineering. The session was conducted by Mr. Ikhalas Patel, Director of Adroit Engineers, Shiroli. The important aspects of entrepreneurship were elaborated during the session. Also, various thrust areas in the manufacturing sector with skills requirements for entrepreneurship development were shared with students. The outcomes of the session will be helpful for students to start a business. The session was coordinated by Prof. (Dr.) B.B. Kabnure under the direction of Prof. (Dr.) V.R. Naik.
“Paper Presentation” @ Mastermind 2K23
DKTE’s Mechanical Engineering Students Association (MESA) organized Mastermind 2K23. This event comprised a Technical Paper presentation. The events got a huge response from the students. More than 45 students actively participated in this event. The theme for the paper presentation was ‘Solution for Sustainability and Development. More than 10 teams actively participated in this event. Prof. S.R. Patil, Prof. R.D. Patil, and Prof. R.R. Kolhapure were the judges for the event.Prof. (Dr.) B.B. Kabnure coordinated the event under the guidance of Prof. (Dr.) V.R. Naik.
A Y 2024-25
IQA Cell of DKTE organizes Three-Day IPR Awareness Workshop on January 18, and 20, 2025 by expert speakers, Ms. Pooja Menon, and Mr. Dhruv Brahmbhatt, Managing Director, MyCrave Consultancy and Services, Vadodara.
Career Guidance Cell organized a webinar on "Career Challenges in the Engineering Era" for second and third year students on 18 Jan, 2025. DKTE’s Trustee Hon. Mr.Ravi Awade and Mr. D. K. Singhal, Director of Chandpur Papers Ltd. delivered expert lectures.
Students participated in IMTEX-2025, a premier event for the manufacturing and engineering industry, held from 23-29 Jan. 2025 at i2 Academia Square, BIEC, Bengaluru.
Alumni Meet was organized on 26th January 2025 at DKTE’s TEI, Ichalkaranji with 25 alumni members. About 10 Alumni from 2000 Silver Jubilee batch attended the meet
Road Safety Awareness Workshop was arranged by Mr. Nikhil Tulsigar, Honda Motorcycles and Scooters Limited, India, Pune Division on 21st April 2025.
Institution’s Innovation Council organized the celebration of World Intellectual Property Day with the nationwide initiative “IP UTSAV” on 29 Apr. 2025.
Organized National level Techsymposium 2K25 on 15 March 2025 bringing together talented engineering students with two thrilling competitions, MAATICH KHEL and CAD WAR 2K25.
Arranged Certification Programme on GD& T and Design Fundamentals for SY and TY B. Tech. Student’s alongwith industry visit to FIE, Yadrav.
On 21st Aug. 2024 a “World Entrepreneurship Day”, hosted session for Final year students by the lecture of Prof. G.C. Mekalke.
Organized a seminar on “Career Guidance for students” on 20 Sept. 2024 on occasion of Engineers’ Day.
A Y 2023-24
TATA Technologies Ltd., Pune (TTL) conducted online a ready engineer (RE1) final test on 28 Jan. 2024.
Organized a workshop on ‘Robotics Programming’ during 9-13 Feb. 2024 in association with ETC dept., Robotics Club, IEEE-AESS and students assn.
Organized a national-level technical event "Techsymposium 2K24" on 16 Mar. 2024 at the college campus, hosting two events "Mech-Dart" and "CNC War".
Commemorated "World Intellectual Property Day" with a dynamic workshop with theme, "Intellectual Property Rights and The Sustainable Development Goals for First Year Engineering Students.
TTL conducted offline Ready Engineer MSME Innovation Workshop (Industry4.0) in 3 batches during Nov & Dec 2023, with jointly schedule by Gokul Shirgaon Manufacturers Association (GOSHIMA), Kolhapur.
SAEINDIA Southern Section, Guindy, Chennai hosted “Engineering Design 2024” competition workshop from April 29 to May 4, 2024.
Mechanical Engineering Students Association (MESA) organized Mastermind 2K23 comprised a Technical Paper presentation.
Students prepared 'Solar Powered Ornamental Plants, Mementos, and Sky Lanterns from recycled paper/cardboard' celebrating “Solarwali Diwali”.
A Y 2022-23
Organized National Level Online Technical Event, “TECH-SYMPOSIUM 2K23” on 24 Feb. 2023 with two events “Solid Modelling” and “Lathe War”.
Organized online certification robotics training workshop from 6 to 29 Mar 2023 which is conducted by APS Germany attended by 100 students.
Conducted “Car Clay Modeling Event” in AICTE Idea Lab on 18 Mar. 2023. Total 27 groups from different colleges from different discipline participated.
In association with AICTE DKTE-IDEA Lab conducted “The Battle of Cycle” Event on 29 Apr. 2023. Total 20 Groups were registered for this Event.
With Career Guidance Cell arranged W/s on “Placement & Higher Studies Opportunities through GATE & other Competitive Exams” on 27 Mar. 2023.
With TATA Technologies Ltd., Pune, conducted an online Ready Engineer (RE2) final test on 2 Apr. 2023 which included test on BIW and Plastic trims. 47 Third year students were certified.
In collaboration with Shivaji University Kolhapur department organized Workshop on “Intellectual Property Rights (IPR)” during 26-27 Aug. 2022. Sessions were conducted by experts Mr.Dhruv Brahmbhatt and Miss. Pooja Menon from MYCrave Consultancy and Services, Vadodara
In collaboration with Shivaji University Kolhapur department organized Workshop on “Intellectual Property Rights (IPR)” during 26-27 Aug. 2022. Sessions were conducted by experts Mr.Dhruv Brahmbhatt and Miss. Pooja Menon from MYCrave Consultancy and Services, Vadodara
Webinar on “Intellectual Property Rights (IPR)” organized on 18 Jan. 2022 for Third year B.Tech. students. Session was conducted by Ms. Puja Menon from MyCrave Consultancy and Services Vadodara.
Mechanical Engineering Department - Silver Jubilee Celebration(1992 - 2017)
The Department of Mechanical Engineering has been the spirit of this Premier Institution. This Department is the Alma mater of several Technocrats and Researchers in India and Abroad. The Silver Jubilee celebrations were started on 28th July, 2017 with the inaugural function at the auspicious hands of Hon’bleShri.K.B.Awade, Chairman of DKTES..Dignitaries who were present on this occasion includes, Shri. Prakash Awade, Vice-Chairman , Dr. Sou. S. U. AwadeHon.Secretary, Mr. R.V. Ketkar Treasurer, Trustees Mr.AshokSoundattikar, Mr. S.D.Patil and Adv.S.M.Kulkarni. Dr.P.V.Kadole Director of D.K.T.E, Dr.V.R.Naik H.O.D. Mechanical Department, all Teaching and Supporting Faculties and Students were present for this Ceremony.
Many events have been planned to celebrate Silver Jubilee of the department.
Engineers’ Day Celebration & Silver Jubilee Monument was inauguration
On this auspicious occasion of Engineers’ Day, a Silver Jubilee Monument was inaugurated at the hands of Mr. Muller, Senior Expert Services, Germany and Director of our Institute Dr. P.V. Kadole. As a part of Silver Jubilee of Department of Mechanical Engineering, a Monument contest was organized in the department. Overwhelming response to this context was received from students. The best monument design was selected for installation.
Students have undergone training at the following industries
|
Industrial Training 2024-25
|
Click here |
| Industrial Training 2023-24 | Click here |
| Industrial Training 2022-23 | Click here |
A Y 2024-25
With Kolhapur Foundry and Engineering Cluster, Center of Excellence, Gokul Shirgaon, Kolhapur has organized One Week Workshop on Industry 4.0 for Final Year Mechanical Engineering Students from 30th Aug to 4th Sept 2024.
Two officials from industries viz. Mr. Sunil Sawant, Managing Director, A.R. Wilfley India, Mumbai and Mr. Vinayak Patil, AVP Sales, Commercials and Programs, Aero Structure Mfg. India Pvt. Ltd,. Belgavi are our Board of Studies members and they attended meeting on 1st 2025.
Jayant Chavan, R & D Development Manager from Dassault Systems Ltd. Pune delivers expert lectures as the speaker for the events and also students were placed at their industry through campus interviews.
An expert lecture was organized by Kolhapur Foundry and Engineering Cluster’s Centre of Excellence, Kolhapur and our Prof. Dr. S. A. Soundattikar, Asst. Professor delivered the lecture on “Exploring Mechatronics” on 23rd January 2025 for New Satara College of Engg & Mngt., Korti, Pandharpur.
A Y 2023-24
Our institute has signed MOU with TATA Technologies Pvt. Ltd., Pune (TTL). As per MOU, TTL has conducted online a ready engineer (RE1) programs regularly. This year, on 28 Jan.2024, they took test on Domain Training in automotive engineering.
Interaction meeting with Centre of Excellence, Gokul Shirgaon Manufacturers’ Association (GOSHIMA), Kolhapur was held on 19-03-2024. Officials from GOSHIMA Mr.Nitinchandra Dalvai, Mr. Mohan Panditrao, Mr. Amol Yadav, Mr. Sunil Shelake, Mr. Nachiket Kumbhojkar and Mr. Vijay Vasagade took a round of the DKTE institute.
A Y 2022-23
APS Germany conducted online certification robotics training workshop starting from 6 to 29 Mar, 2023. 100 students and faculty members were participated.
As a part of MOU with Thermax Pune, four faculty members have undergone intensive training at Thermax Heating Division on 23-24 Jan, 2023.
B.B. Kabnure of Mechanical department have successfully completed the industrial training entitled “Train the trainer: Building Automation, Energy audit and IoT” at Johnson Controls, Pune during 24-28 Apr, 2023.
Sachine Chougule, Manager, Inteliment Technologies Pvt. Ltd. Pune attended online meeting of our Board of Studies on 30 Jun 2022. He gave their valuable suggestions, inputs and comments related to various academic activities.
A Y 2024-25
Industrial Exhibition visit of Second and Third Year students at MAHATECH 2025 at New Agricultural College Ground, Shivaji Nagar, Pune on 8 Feb. 2025.
Industrial Visit of Final Year B.Tech Mechanical Students on 3rd March 2025. to Wind Energy Site of Enercon Wind Energy Systems, Gudhe, Dist. Sangli.
Industrial Visit of Final Year B.Tech Mechanical Students on 4th March 2025 students visited to Kallappanna Awade Jawahar Shetkari Sahakari Sakhar Karkhana Ltd., Hupari, Dist. Kolhapur
Second Year Mechanical students visited Elite Industry, Super Craft Foundry and Flame Industry, Jaysingpur on April 19 2025.
Third year students visited E.D. Steel’s Zanvar Group of Industries, Shiroli MIDC, Kolhapur on 19th April 2025.
Third year students visited to Central Air Conditioning plant at N.B. Ghorpade Natyagruh, Ichalkaranji, and M/s Badshah Bajaj, Ichalkaranji. on 30 Apr. 2025
Second Year students visited ‘Kallappanna Awade Jawahar Shetkari Sahakari Sakhar Karkhana Ltd.’, Hupari on 16th 2024.
A Y 2023-24
D. Steel Pvt. Ltd and Accurate Engineering, Shiroli MIDC, Kolhapur for Third Yr. Mech.
A Y 2022-23
Second Year Mechanical students visited ‘FIE Ltd. HMD Division’, Yadrav on 6 May 2023.
Second Year Mechanical students visited ‘Flame Industry’ Jaysingpur on 6 May 2023.
Second Year Mechanical students visited ‘Elite Industry’, Jaysingpur on 6 May 2023.
Industrial visit for Final year B.Tech students to ACE Mfg. Systems Ltd. and ACE Designers Ltd., Bangalore and Mysore on 27-28 Apr. 2023.
Industry Sponsored Laboratories provides students as well as faculty members to perform practicals on current technologies running in the market which encourages them to carry out industry-sponsored research-oriented projects.
The department has the following Industry sponsored Laboratories
The following table gives details of different numbers of Kit/Board received from respective industries with an approximate cost
|
Sr. No. |
Name of Board/kit Received |
Funding Agency |
Total Costing (Approx) |
| 1 |
Engine and Fuel Research Lab |
Modernization and Removal of Obsolescence (MODROB) | Rs.15,59608 |
| 2 |
AICTE IDEA Lab @ DKTE |
AICTE, New Delhi | 1 Crore 15 lakhs (AICTE 55 Lakhs) |
|
3 |
BOSCH Rexroth Industrial Automation Lab |
BOSCH Rexroth, Bengaluru |
4 Crores |
|
4 |
“SMART FOUNDRY” |
IIT Mumbai |
85 Lakhs |
To build good rapport between the industry and the institute, department have Memorandum of Understanding (MoU) with the industries. This provides industry support to department in regards to industrial training, curriculum designing, conducting guest lectures, sponsoring projects and other related to academic.
|
Sr.No. |
MoU |
Scope of Activities |
| 1 | Thermax Ltd. Pune (O&M Division) |
· Training programs for students · Placement assistance |
| 2 | Thermax Ltd. Pune (Heating Division) |
· Training programs for students · Placement assistance |
|
3 |
TATA Technologies Ltd. Pune |
· Training programs for students · Placement assistance |
|
4 |
BOSCH Rexroth Ltd. Bengaluru |
· Training programs for students · Placement assistance |
|
5 |
Bharat Forge Ltd. Pune |
· Training programs for students and Faculties · Placement assistance |
|
6 |
RWTH Aachen University Germany |
· Training programs for students · Placement assistance |
|
7 |
MYCrave Consultancy & Services, Vadodara, Guj. |
· Patents consultancy Training / Workshop for IPR filing |
| 8 | CADCAMGURU Solutions, Pune |
Provide students training Soft skill training |
| 9 | COE, KFEC, GOSHIMA, Kolhapur. |
Students Research projects. Enhance employability |
Page 22 of 33
